$42.00
Mitty builder gel in a bottle is designed so that it keeps it shape which means it reduces the application time. Plus it needs minimal filing. This means you will have a fabulous nails a lot faster than other applications.
Mitty Brush on Builder is both UV and LED curable and soaks off with pure acetone.
Our specially developed formula is the perfect Brush on Builder gel formula that allows you to extend the length of your nails using nail forms or nail tips. This soak-off gel is cured in 60 seconds under LED lamp or 2 minutes under UV lamp.
Brush on builder gel is also known as soft gel, builder gel in a bottle or simply referred to as builder gel.
1. Clean your hands using sanitizing spray or gel. Manicure your nails by gently pushing back your cuticles.
2. Clean and dehydrate the nail plate using nail polish remover or an alcohol wipe.
3. If you are using tips to lengthen your nails, apply the tip using nail glue and file the tip down so that the surface between your nail and tip is even. Gently remove the shine from the nail plate and the nail tip using a sponge file.
4. Use Mitty PH Bonder to the nail plate. Only apply it to the natural nail. Use sparingly and don’t touch the skin with it.
5. Apply Mitty Gel Primer to the nail but not the nail tip.
6. Brush on a thin layer of the Mitty Builder Gel and cure for 60 seconds in Mitty 54W LED nail lamp. Do not wipe this layer.
7. Apply a thicker layer and spread it with the brush side to side. Make sure you stay away from your cuticles. It is best to aim for a level layer specially in your free edge (part of your nails that extends passed your cuticles). Cure for 60 seconds in Mitty 54W LED nail lamp.
8. Assess the shape and thickness of your nails. You can add a third layer if you like to have thicker nails or if you see uneven areas. Remember to not wipe the nail between layers.
9. If you are ready to shape the nail you can now clean the tacky layer with alcohol.
10. Refine and buff your nails into shape using a 120/180 grit. We want to reduce any excess product around your cuticle area and the free edge.
11. If you need to apply more gel to the nail you can. Just remember that the gel will only stick to a matte or tacky layer.
12. Once filed and you are happy with the shape remove the dust filings with a nail brush and apply your top coat.
PLEASE NOTE: Curing time may differ depending on the voltage of your nail art lamp.
1. File your applied builder gel to remove seal with Mitty 100/100 Grit file or a nail drill like Mitty portable nail drill and using Smooth Top Barrel-Medium nail drill bit. Using a nail drill will speed up the process.
2. Cut a cotton pad into 4 pieces.
3. Soak the pad with pure acetone.
4. Slip the pad inside Mitty Polish off Soakie and slide the Soakie onto your finger. (You can use aluminum foil as well; however we ask that you consider the impact on the environment)
5. Wait 15-20 minutes.
6. Using a cuticle pusher, remove the builder gel. Repeat previous steps if builder gel is not fully removed.
7. Buff your nails.
8. Use Mitty Cuticle oil to moisturise your cuticles and nails.
